70KG Vibration Welder

Linear vibration plastic welding is a kinds of friction plastic joining technology that one thermoplastic part half is held with no moving while the other thermoplastic half is doing reciprocating motion (called as linear vibration) in fixed high frequency and vibration amplitude under pressure, through which heating energy is generated to melt thermoplastic material at the contacting surface. When the melting reach enough quantity, vibration stop and keep two plastic part halves together at the original relative position, until the molten thermoplastic material become re-solidified and form joining.

MP-SONIC vibration plastic welder imports and improves Korean technology, which has been test by markets since 2012. MP-SONIC doesn't only applies Korean vibration plastic vibration welding technology, but absolutely master the complete set of technique, from the raw material & elements to the whole system & machine, as well as the entire vibration plastic welding procedure, by which MP-SONIC can improve & optimize it constantly.

MSV-730LS is a vibration plastic welder in a high specification which can be applied for plastic welding in big size. MSV-730LS linear vibration welder can be applied for weld automotive Instrument panel, tail lamp, trunk, air inlet manifold, etc. The upper jig weight is up to 70KG, and the vibration amplitude can reach 1.8mm.

MP-SONIC vibration plastic welding machine applies critical parts and material from Europe, USA, Japan or Korea basing on condition, to ensure its perfect vibration plastic welding performance and stability in running, while MP-SONIC manufactures & assembles the complete machine in China to reduce machine cost which is under strict control to ensure machine quality.

MP-SONIC provide free plastic jointing design guide and analysis.

Features:

• Auto-tuning the frequency after jig loading;
  
• Welding process steps control to meeting different high thermoplastic vibration joining requirement;
  
• Operation mode can be time mode or depth mode;
  
•  80 sets of welding parameter storage;
  
• Welding quality judgment help quality management;
  
• Internet connection function is available;
  
• Printing function is designed.
  

Specification:

• Model: 730LS
  
• Weight upper tool: 70kg
  
• Welding area(approx):  460cm²
  
• Amplitude(peak to peak): 0.5~1.8mm
  
• Frequency (with Fixture ): 230~260Hz
  
• Frequency ( without Fixture ): 200~260 Hz
  
• Machine Dimension: 2554*1240*2240
  
• Front Door Opening: 1500*790(mm)
  
• Drive Platen/upper : 1020*540(mm)
  
• Lift Table Size: 1500*600(mm)
  
• Table stroke: Max. 500 mm
  
• Max. distance between lift table&Vibration Head: 735mm
  
• Table Elevating Speed: 250mm/s
  
•  Clamp Force: 32kN
  
• Hydraulic System: Servo Pump
  
• Hydraulic oil: ISOVG32
  
• Weight: about3700kg
  
• Sound pressure level: <85dB
  
•  Main voltage(3P)/Input: AC220V/50,60Hz / AC380V ,440V
  
• Power consumption: 47KVA
  
•  Maximum Power/Out Put: 30Kw
  
• Control Voltage: DC 24V
  
• Frequency Tuning: Auto/Manual
  
• Auto Tuning: about 4Sec.
  
• Welding Control: Depth/Time
  
•  Step for Welding: 8Stage
  
• Set up number: 80ea
  
• Welding Result Analysis: Good/Bad
  
• Language: English/Chinese/Korean
  
• Internet: Yes
  
• Communication: Yes
  
• Printer: Yes
  

Optional Features:

• SPC;
  
• Infrared pre-melting system.