|Home||» Products||» Custom Welding Machines||» Multi Heads Hot Plate Plastic Welding Machine|
Multi Heads Hot Plate Plastic Welding Machine
Multi heads hot plate welding machine means applied two or more heat system to attach small accessories onto a master plastic, which is designed and made based on thermoplastic parts, quality specifications and customer requirement. For high welding requirements, based on the thermoplastic parts material, it can apply infrared system instead of hot platen system for melting thermoplastic parts. It mostly applied for the assembling production of fuel tank, air-ducts, air inlet pipe, etc.
Since there normally no support on the back of the welding area, the parts requested to be very hards, as well as because of parts deformation, it requests control the welding action by pressure force and detection the action depth. For most of such kinds of parts assembly, it requests boring, drilling or cutting the blow moulding pars before heating welding.
I. Basic Specifications:
1. Power source: 380V, 3P;
2. Air Source: 0.8MPa;
3. Temperature: Over than 200 oC.
II. Basic Features:
1. PLC & HMI control;
2. PID temperature control for stable & accurate temperature;
3. Linear Guide for precision action;
4. Vacuum Generators for parts holding;
5. Safety Door System;
6. Optical Fence;
7. Alarm system;
8. Air Tank.
1. Loading cell control for accurate welding control since the special parts condition;
2. Depth Control & Detection for the best welding performance;
3. Boring/Dring if requested by production procure;
4. Key Way Punching if requested by production article;
5. SPC for production management;
7. Vacuum Pump for high vacuum value requested;
8. Parts Detection if requested;
Please send us your requirement and information of parts to be welded for our reference, we provide analysis in free as our technical support to you.