Call Us
Servo Hot Plate Plastic Welder 760*600 Servo Hot Plate Plastic Welder 760*600 Servo Hot Plate Plastic Welder 760*600 Servo Hot Plate Plastic Welder 760*600 Servo Hot Plate Plastic Welder 760*600 Servo Hot Plate Plastic Welder 760*600

Servo Hot Plate Plastic Welder 760*600

>1 USD ($)/Set

Product Details:

  • Type Servo driven, vertical type designed
  • Condition New
  • Motor Type Other
  • Power 45K Watt (w)
  • Voltage 380 Watt (w)
  • Dimensions L1550*W2200*H2562 Millimeter (mm)
  • Input Voltage 380 Volt (V)
  • Click to view more

Price And Quantity

  • >1 USD ($)/Set
  • 1 Set

Product Specifications

  • Other
  • 135 Ampere (amp)
  • 45K Watt (w)
  • New
  • 380 Volt (V)
  • Servo driven, vertical type designed
  • 380 Watt (w)
  • L1550*W2200*H2562 Millimeter (mm)

Product Description

Servo hot plate welder MSH-8060S is designed to weld large thermoplastic by heating. Machine max welding square is 800*600 (mm), and the effective welding square is 750*600 (mm). This hot plate welding machine tooling action forced by servo motors in high precision in 0.02mm.

The machine applies PLC to control action sequence. MP-SONIC deigned temperature controlling system control hot platen melting temperature in PID. Through change temperature control system, it can achieve non-contact plastic welding by infrared system. Machine control temperature by temperature modules of PLC. All machine parameters are set on HMI.

Basic Features:

  • The servo control system in high precision;
  • Fast action speed, especially good for low-temperature hot platen welding;
  • Achieves action speed process control (speed-steps-control);
  • Hot platen melting temperature controlled by PID, welding temperature is controlled instability and high precision;
  • The heater error ID is detected and indicated on HMI for easy fault-shooting;
  • Welding parameters storage is available to manage the hot plate welding process;
  • Alarm message/fault history is recorded for hot plate welding quality management;
  • The optical fence at front and safety door at sides and rear is designed for security;
  • Vacuum generator and pneumatic clip system is designed to hold plastic parts during hot plate welding;
  • Ejection function by the pneumatic system is designed helping remove welded parts from jigs;
  • Parts detection function is available to avoid operation without parts loading.

Optional Feature:

  • Auto security front door;
  • Auto jig loading system for quick tooling change-over;
  • Preheating device for efficient welding production;
  • SPC for production management;
  • E-tech for internet;
  • Terminal for printer;
  • Auto electrical plugs and air connectors for jig;
  • Tooling automatic identifying to identify hot plate welding and load welding parameter automatically;
  • UPS for control system;
  • Vacuum pump for high vacuum pressure;
  •  Accessories detection to avoid welding unloading small parts;
  •  GT sensor function to ensure parts is loaded in the right position before operating for plastic welding in high precision.


  • Power Source: 380V 3P  50/60Hz
  • Air Source: 0.5Mp;
  • Dimension:L1550 x W2200 x H2562 (mm);
  • Jig Base Plate: 880 x 650
  • Suggested Welding Square: <750*600 (mm)
  • Welding Square: 800 x 600(mm)
  • Jig Transmission: High Precision Screw Bar;
  • Hot Platen Transmission: Gear Bar;
  • Clips: 4+4;
  • Accessory Detector on Jig: 6+6
  • Cavity Parts Detector: 2+2
  • Temperature Control: 8 Sets
  • Safety Optical fence + Auto front door
  • Vacuum: Vacuum Generator
  • Cooling for Control Cabinet: Fan
  • Smoke Exhaust: Exhaust Fan
  •  Heating Alarm: Heating current supervision and alarm